Posts made in October, 2017

Tips on How to Mix Concrete 

It is true that mixing concrete is not difficult but beginners should learn to recognize when the desired consistency has been achieved. Prior to mixing, one must also learn about safety precautions and about the materials to be gathered. If this is too much for you, then it is advisable that you contact professionals such as concrete contractor company Naperville. 

 

Here are some tips on how to properly mix concrete. The first thing to do is get some premixed concrete at nearby home improvement center. Into a wheelbarrow or tub, pour some premix concrete. Working it in with a shovel, add just a little water at a time as you go. Thrust the shovel underneath the premix concrete and fold it over on itself to mix concrete. 

As you mix the concrete, continue adding small amounts of water until all of it looks the same and it achieves a consistency that is neither dry nor soupy.  It ends up with a consistency that has been compared to cookie dough when you mix concrete properly. 

Use the blade of your shovel like a knife and try to cut a shallow channel through the surface of the premix concrete to test the consistency.  The channel walls will be crumbly if it is too wet, you must add more water and mix the concrete further. However, the channel will fill in with water if it is too wet, you must add more premix concrete and stir. 

Since the dust can be caustic, wear a protective mask, gloves, and eyewear when you mix concrete. The biggest challenge to address when mixing concrete will be lifting the product. Keep a straight back, bend your knees and cradle the load up against your torso when lifting. Wearing a black brace is also recommended. 

A coloring agent can be applied when you mix concrete but this depends on you. The important tools needed are a shovel, wheelbarrow, water, premix concrete, protective clothing, and back brace.  

The next essential skill that you need to learn is how to cure concrete properly. You will have two of the basic building blocks required any project involving concrete once you know how to mix and cure this material correctly. Determining the amount of concrete that will be necessary for a given project is another question that typically plagues beginners. 

You want to live out its life like a baby when concrete is born. When it is still young and you take good care of it, it will grow up to be a strong and reliable adult. To keep our concrete baby happy during the first week or so of its life, curing is very important.  You must maintain the proper temperature and dampness.  

Even though curing is easy to skip in an instant, it will surely have a major impact on the quality of your finished work.  The problems that arise from not curing properly are most obvious with horizontal surfaces. The surface will have a low strength that can result in dusting and has little resistance to abrasion. 

 

 

Read More

A Quick Guide to Planning Your Irrigation System’s Watering Schedule

Experts recommend that you plan your watering schedule carefully and write it down so you remember before you perform actual programming on your time or controller. There are many variables including sprinklers, type of soil, drip irrigation systems, sunny areas, the wind, slopes, shady areas, etc., that is quite impossible to be associated with an exact formula regarding with how you should program your irrigation timer or controller. As a matter of fact, each watering zone or station will have a varying requirement. We suggest that you spend some time in understanding how much your water your plants need in each station. You can start by answering the questions below:  

 Irrigation System

  1. How Long Should You Water Each Station? 

In order to make sure that you don’t under or over water a particular watering station or zone, experts recommend that you find out first what the saturation point is for every zone on your system. You can use a wrist watch or stop watch to determine the saturation point of the soil. Turn on the valve and then watch the sprinklers watering your plants. When the water begins to run off the watered area, the soil has already reached its saturation point. You should record the time for the saturation point for this watering station or zone, but try to program a little lesser time for the zone so that you’re not wasting water. You can repeat this for every station on your irrigation system. This can be a very great starting point if you want to determine how long you should water every watering station or zone on your system.  

  1. How Frequent Should You Water Each Station? 

Now that you have already determined how long it will take for the soil to saturate, you’ll also need to estimate how long it would take the water to evaporate. Most of the time, this will vary yearly depending on weather, wind, temperature, sun, and shade. In addition to that, you’ll also find that some stations will also need water more often compared to others. It will then make the adjustments easy using your controller or timer. Fortunately, most irrigation service provider offers irrigation system with different programs and multiple start times in order to accommodate all the scheduling requirements, needs, and preferences of their customers.  

  1. What Is the Best Time of The Day to Water? 

It’s often recommended that you water one to three hours before sunrise, especially when water pressure is optimal. But, you might be competing for water pressure with your neighbors. This is the reason why you should pay to the watering patterns of your neighborhood as well in order to determine what is the best time to start watering. Every early in the morning is considered as the best time for most plants. This is because less water will evaporate during early morning hours and there are chances that the leaves will burn if the plant is water while there is sunshine. If you want to know more about irrigation systems, visit us here www.mytorontolawnsprinklers.com.

Read More

Recent Comments